Rubber and plastic insulation materials will use special glue during installation and construction to ensure that the installation is more tight and secure. When brushing the rubber insulation special adhesive, the professional construction master will evenly paint the rubber and plastic splicing place, and wait for a period of time before the rubber and plastic insulation material is bonded.

The uniform coating of rubber and plastic insulation special adhesive is to prevent the rubber and plastic insulation material from not being brushed, so as not to have a strong bond. Wait for a period of time before bonding the rubber and plastic insulation material to ensure that the glue can fully dry and cure.

When the glue is applied, the solvent evaporates, making the glue more viscous and beginning the curing process. By waiting for the glue to dry and cure, you can ensure that the adhesive is in sufficient contact with oxygen in the air to form a strong bonding layer. If the glue is not completely dried and cured before pasting, it may cause the bond is not strong, affecting the bonding effect and service life.

However, the drying and curing of rubber insulation special adhesive takes a certain amount of time to complete. However, this time is not fixed, some people wait for 20S to 30 seconds to begin bonding, and some people wait until 2 to 3 minutes to begin bonding.

This is because the drying and curing time depends on a number of factors, including ambient temperature, humidity, and glue thickness. Therefore, when we are unsure of the drying and curing time, we can use our hands to feel the drying of rubber and plastic insulation special adhesive. When we see that the brushed thermal insulation glue does not drip flow, you can contact the coated surface with the back of the hand, such as contact with the non-sticky hand on the rubber surface, it means that the thermal insulation glue has been dried and solidified, then you can bond the rubber and plastic thermal insulation material.

In order to obtain the best bonding effect and service life, rubber and plastic insulation materials need to pay attention to cleaning the bonded surface during installation and construction, and rapid construction, too long waiting may cause the glue surface to be contaminated again or lose the bonding performance.

Rubber insulation special adhesive coating needs a certain amount of time to bond, the bonding time is not fixed, need to be determined according to the ambient temperature, humidity and glue coating thickness.